Rice Lake 920i Based Truck In/Out System - Manual (Page 21)

Weighing 17
4.2 Weigh Out
The general weigh-out procedure is as follows:
4.2.1 Truck Number or Transaction Lookup
1. Enter the truck number or the transaction lookup number (depending on what you have set up in the
Supervisor menu system parameter) by using the up/down, right/left navigation keys, to scroll through the
alpha-numeric menu.
Figure 4-7. Weigh Out Truck Number
2. Press enter to save the truck number.
Figure 4-8. Truck Info Screen
3. Once the customer and product are entered and saved, press the Complete softkey to complete the weigh in.
The truck ID (temporarily stored), is then deleted from the truck database.
Home Cancel
10/22/07 08:05AM SCALE #1
-888.8888
Mode
Units
End
Scale
#1
Truck
Tare Gross
Customer
Product
Net
Truck Lookup
Enter Number
Project
Cancel Customer
10/22/07 08:05AM SCALE #1
-888.8888
Mode
Units
Complete
Scale
#1
Truck
Tare Gross
Customer
Product
Net
Project Product
Project