Rice Lake 920i Based Truck In/Out System - Manual (Page 20)

16 920i Based Truck In/Out Weigh Program
4.1.3 Project Selection
1. Enter the project selection by using the up/down, right/left navigation keys, to scroll through the
alpha-numeric menu.
2. Press enter to save the project selection or press enter without typing anything into the Enter Project field.
Figure 4-5. Project Selection Screen
3. Once the customer and product and project are entered and saved, press the Complete softkey to complete the
weigh in. The following screen is shown and the indicator generates a weigh-in ticket.
Figure 4-6. Weigh In Complete Screen
4.1.4 Weigh In Canceled
If you want to quit the weigh in, use the Cancel softkey (shown in Figure 4-5) to cancel the weigh in process.
Home Cancel
10/22/07 08:05AM SCALE #1
-888.8888
Mode
Units
End
Scale
#1
Truck
Tare Gross
Customer
Product
Net
Project
Product
Enter Pr od ID
Weigh Weigh Out
10/22/07 08:05AM SCALE #1
-888.8888
Mode
Units
Supervisor
Mode
Scale
#1
Truck
Tare Gross
Customer
Product
Net
Weigh In
Scale
Select
Complete
Project