ProgressiveRC 10XP FMA Cellpro - Manual (Page 5)

Precautions
Follow all instructions in this manual to assure safe operation.
IMPORTANT: Do not disconnect or connect packs while the charger is charging.
Always watch LiPo packs while they are charging. Never leave LiPo packs unsupervised during
charging.
See additional warning sheets provided with your battery packs.
Follow all guidelines for charging, discharging, handling and storing LiPo cells.
Minor arcing may occur when discharge wires are connected to the charger before charging. This is
normal.
Parts
Cellpro 10XP Charger
Removable input plier clips (red/black) for connecting the CP10XP to a DC power source
Optional: FUIM2-US or FUIM3-US PC USB Adapter (required for using the Charge Control
Software)
Optional: Cellpro 6-pin to 5-pin Adapter(s)
Optional: Cellpro 10s Adapters (brands other than REVOLECTRIX Cellpro)
Optional: CP10S-BP12-2PK-US, Cellpro 10s Banana Plug Output Cables (2 pack) – solder the
mating end of the connector you use on your battery’s discharge wires to these cables
Notes:
You may have already received some of the optional items listed above with the purchase of a Combo.
Unless otherwise stated, REVOLECTRIX part numbers found within this manual assume purchase was or
will be made within the United States. If ordering from the International website, drop the “-US” from
the part number.
5