ProgressiveRC 10XP FMA Cellpro - Manual (Page 4)

During discharge to storage, the CP10XP incorporates 1A-per-cell (nominal) discharge rate using the
charger’s integrated balancing circuitry to provide up to 42W (at 10s) discharge power.
Light-grey, 2 line, 16 character backlit LCD display provides easy readability.
One button, Charge Optimization can be set for an Accurate 1mV cell balance and (C/20 termination)
or for Faster Charging (less balancing accuracy and C/10 termination) using the Charge Control
Software or at the CP10XP interface.
Protects your Pb input source from over-discharge by providing an audible warning when input
voltage of your Pb battery approaches 50% state of charge.
Intelligent controller performs extensive checks to prevent damage to packs and power supply. This
makes it virtually impossible to damage the charger or the batteries from incorrect connections or
wiring; including, but not limited to reverse polarity.
Input reverse-polarity protection.
Simple, effective, 2-button interface allows instant access to presets, preset parameters, and starting
and stopping charger operations.
Access pre-defined, named presets by clicking the MODE button.
Hold the MODE button to access the Main Menu operations: Choose Chg. Amps, Choose Chemistry,
Show Help Screen, Exit. Use the charger’s Main Menu to alter basic settings of presets on-the-fly, or
make the adjustments using the free PC Charge Control Software (CCS).
Press and hold the START/STOP button to start charger operation or cancel/end a charging session.
Press and hold MODE button during power up to access Options Menu; choose input amps limit and
supply low voltage setting (Power Management feature), alternate between FMA or XH balance
wiring schemes, and set quiet charging (no speaker beeps during charging).
Supports Bi-directional, optional PC interface (REVO PN: FUIM2-US or FUIM3-US) which enables
extensive charger setup using the CCS. Configure up to 10 custom presets, adjust speaker volume,
set LCD contrast and control many other settings.
CCS automatically checks for software and charger firmware updates in the background. Update
charger firmware reliably with the click of your mouse button, and without sending the charger back
to the factory. Keep up-to-date with the latest enhancements and bug fixes.
6 different, available Fuel Gauge lookup tables (fuel tables) may be assigned to independent presets
to match the characteristics of different Li battery chemistries. This feature only available using the
CCS.
Works with a wide range of power supplies, even those not rated for high power. Easily changes
from moderate current bench supply at home to car battery at the field using the Power Management
feature. Set Input supply amps limit and supply low voltage settings using the CCS or at the charger
interface, to prevent damage to your input source.
4