System sett ings, Display settings – Mercedes-Benz E-Coupe 2011 COMAND Manual User Manual
Page 44
COMAND features
These Operating Instructions describe all
standard and optional equipment available
for your COMAND system at the time of
purchase. Country-specific deviations are
possible. Please note that your COMAND
system may not be equipped with all the
features described.
Display settings
Switching the display on/off
X
To switch off the display: press the
W button.
X
Select
Display Off
by turning cVd the
COMAND controller and press W to
confirm.
X
To switch on the display: press W or
cVd turn the COMAND controller.
or
X
Press the o button.
Setting the brightness
The brightness detected by the COMAND
light sensor affects the setting options for this
function.
X
Press the W button.
X
Select
Settings
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Display
and press W to confirm.
X
Select
Brightness
and press W to
confirm.
:
The needle shows the current setting
X
Adjust the brightness by turning cVd the
COMAND controller and press W to
confirm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X
Press the W button.
X
Select
Settings
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Display
and press W to confirm.
X
Select
Day Mode
,
Night Mode
or
Automatic
by turning cVd the COMAND
controller and press W to confirm.
The dot in front of the entry indicates the
currently selected setting.
42
Display settings
System
sett
ings