Northbridge configuration screen, Dram frequency – Kontron CP307-V BIOS User Manual
Page 90
Chipset Setup
CP307/CP307-V BIOS Guide
Page 80
ID 35978, Rev. 2.0
P R E L I M I N A R Y
NORTHBRIDGE CONFIGURATION SCREEN
This screen provides functions for specifying the NorthBridge configuration settings.
Note:
The NorthBridge Configuration setup screen varies depending on the supported
NorthBridge chipset.
DRAM Frequency
This function is used to set the DRAM frequency.
Note:
It is not possible to raise the DRAM frequency above the maximum value allowed
by the SPD data, even if higher frequency settings are available.
Optimal and Fail-Safe default settings: Auto
SETTING
DESCRIPTION
Auto
Use this setting to allow the BIOS to determine the highest possible DRAM frequency using
the SPD data.
400 MHz
Use this setting to limit the DRAM frequency to 400 MHz.
533 MHz
Use this setting to limit the DRAM frequency to 533 MHz.
667 MHz
Use this setting to limit the DRAM frequency to 667 MHz.