Kontron CP307-V BIOS - Manual (Page 106)

OEM Feature CP307/CP307-V BIOS Guide
Page 96 ID 35978, Rev. 2.0
P R E L I M I N A R Y
Clear Configuration Block
This function is used to clear the previously stored settings in the setup default override config-
uration block. When cleared, the Optimal and Fail-Safe default settings are no longer overrid-
den when used for booting. Clearing the configuration block does not affect the current settings
in use.
Optimal and Fail-Safe default settings: No
Override Structure present
This is a display-only function which indicates whether or not an override structure is available
or valid.
Kontron EEPROM Release Version
This is a display-only function which indicates the Kontron release version of the current over-
ride structure. The setting of this function is only valid if the override structure was provided by
Kontron.
OEM EEPROM Release Version
This is a display-only function which indicates the OEM release version of the current override
structure.
Config. Block Activation Flag
This is a display-only function and is reserved for Kontron internal use.
SETTING DESCRIPTION
No This is the BIOS default setting and is automatically set to “No” after the configuration block
is cleared.
Yes Use this setting to enable clearing of the configuration block during the next boot operation.
SETTING DESCRIPTION
No This setting indicates that the override structure is not present.
Yes This setting indicates that the override structure is present and valid.
INV This setting indicates that the override structure is present, but is was previously invali-
dated by the command “Clear Configuration Block”.