Kontron CP307-V BIOS - Manual (Page 35)

CP307/CP307-V BIOS Guide Advanced Setup
ID 35978, Rev. 2.0 Page 25
P R E L I M I N A R Y
S.M.A.R.T. for Hard Disk Drives
The Self-Monitoring Analysis and Reporting Technology (SMART) feature can help predict im-
pending drive failures.
Optimal and Fail-Safe default settings: Auto
32Bit Data Transfer
This function is used to set the 32-bit data transfer.
Optimal and Fail-Safe default settings: Enabled
ARMD Emulation Type
An ATAPI Removable Media Device (ARMD) is a device that uses removable media, such as
the LS120, MO (Magneto-Optical), or Iomega Zip drives.To boot from media on an ARMD, it is
required to emulate booting from a floppy or hard disk drive. This is especially necessary when
trying to boot to DOS.
Optimal and Fail-Safe default settings: Auto
SETTING DESCRIPTION
Auto Use this setting to allow the BIOS to auto detect hard disk drive support if the IDE disk drive
support cannot be determined.
Disabled Use this setting to prevent the BIOS from using the SMART feature.
Enabled Use this setting to allow the BIOS to use the SMART feature on support hard disk drives.
SETTING DESCRIPTION
Disabled Use this setting to prevent the BIOS from using 32-bit data transfers.
Enabled Use this setting to allow the BIOS to use 32-bit data transfers on support hard disk drives.
SETTING DESCRIPTION
Auto Use this setting to allow the BIOS to automatically set the emulation used by ARMD.
Floppy Use this setting to specify that ARMD should emulate a floppy drive during boot up.
Hard disk drive Use this setting to specify that ARMD should emulate a hard disk drive during boot up.