Kontron KISS 2U X9SCM Low profile - Manual (Page 13)

6. Scope of Delivery KISS 2U V2 – User's Guide (Version 1.00)
6.
Scope of Delivery
‰ KISS 2U V2 platform (system configuration ordered)
‰ 2x key for the front access panel lock
‰ 1x Ferrite core (for DC system configuration)
‰ 1x AC power cable (for AC system configuration)
‰ 2x AC power cable (for AC system configuration with redundant PSU)
‰ Rubber feet (self-adhesive)
‰ Instruction for attaching the ferrite core
‰ General Safety Instruction for IT Equipment
Optional Parts
‰ Slide Rails (PN: 1016-5807)
‰ Rack Slide Rails Kit for KISS 1U and KISS 2U/4U V2 (PN: 1051-7200)
6.1. Type Label and Product Identification
The type label (product designation, serial number) and the inspection status label of your KISS 2U V2 platform are
located on the right side of the device.
System Type Product Name Product Identifikation
KISS 2U V2 KISS 2U V2 xxxxxxxx-y KISS 2U V2 = System Type
The “xxxxxxxxx” group is replaced by up to a max. 8-digit combination of
numbers, letter or space, and represents the installed CPU board
The “y” is replaced by a single letter (A through Z) representing the power
supply installed into the system.
Note:
A: corresponds to the systems with a wide range AC power supply
B: corresponds to the systems with a redundant wide range AC power supply
C: corresponds to the system configuration with +24 VDC power supply
D: corresponds to the system configuration with -48 VDC power supply
www.kontron.com 11