Kontron AT8242 - Manual (Page 63)

47 AT8242
www.kontron.com
4.3.3 FRU Information
Table 4-20:Board Information Area
Table 4-21:Product Information Area
4.3.3.1 ATCA Board E-Keying Information
The board E-keying information contains PICMG 3.0 R3.0 defined channel and link descriptors required for
matchmaking computation by the ShMC.
E-keying information covering the Fabric Interface is based on PICMG 3.1 R2.0. This revision of the PICMG 3.1
specification introduces the Link Class field within the Link Descriptor, which was not previously defined.
Backward compatibility with PICMG 3.1 R1.0 is insured by keeping Link Descriptors with a non-zero Link Class
at the end of the list for each Fabric Interface channel. A ShMC supporting PICMG 3.1 R2.0 will re-order the
Link Descriptors during E-keying negotiation and prioritize those having a higher signalling link class.
24 Vcc +1.0V
25 Vcc +1.0V Aux
26 Vcc Vtt
27 Vcc -48V Feed
28 Vcc HUV
29 Vcc FVR
31 Fuse-Pres A Feed
32 Fuse-Pres B Feed
34 Power Good
41 IPMI Watchdog
Board Information Area
Board Mfg Date Programmed with manufacturing date
Board Mfg Kontron
Board Product AT8242
Board Serial Programmed with serial number
Board Part Number Programmed with part number
Board FRU ID FRU5311-xx
Board Extra MAC=xx:xx:xx:xx:xx:xx/64
Product Information Area
Product Manufacturer Kontron
Product Name AT8242
Product Part Number Programmed with part number
Product Version Programmed with board revision
Product Serial Programmed with serial number
Product FRU ID FRU5311-xx
IPMI Sensor ID Sensor Name