Kontron AT8242 - Manual (Page 45)

29 AT8242
www.kontron.com
4.2.3.2 System
4.2.3.2.1 System Information
Once connected to the Web Management Interface, the first page displayed is the System Information. All
board information is displayed on this page.
4.2.3.2.2 LAN Info
This page displays information on the IPMC LAN interfaces configuration. This configuration can be updated
using this interface.
4.2.3.2.3 System Tree
This page lists the IPMB addresses of the boards connected in the chassis.
4.2.3.3 Sensor
4.2.3.3.1 Reading
This page displays all board sensor readings. Values can be manually refreshed. Refer to sections “IPMC
Sensors” on page 41 and “MMC sensors” on page 60 for a list of sensors for this board.
4.2.3.4 Event Log
4.2.3.4.1 Reading
This page displays System Event Log (SEL) information and the event list. The SEL can have up to 5119
entries, and it can be cleared or refreshed manually. Using the arrows under the table allows browsing
through the event list.
Note:
A maximum of 4 sessions can be opened simultaneously. Up to 5 users can be configured. An
automatic logout will be done after 300 seconds of inactivity.
Note:
Configuration of the LAN interface being in use to access the Web Management Interface may lead
to loss of connection.