Kontron CP383 - Manual (Page 50)

Configuration CP383
Page 4 - 4 © 2004 Kontron Modular Computers GmbH ID 27784, Rev. 01
27784
.01.VC.040308/162543
P R E L I M I N A R Y
4.2.3 Channel Configuration
The following figure illustrates the typical schematic of an input channel.
Figure 4-2: Input Channel Schematic
Signals require to be connected: plus to plus, minus to ground as shown in figure 4-3 below.
Figure 4-3: Input Configuration (Example for Channel 0)
G
S
JFET
D
to system
System Input Cluster
Signal
Input
Voltage
Source
V
+
CON2
DIGIN0+
Pin21
DIGIN0-
Pin42
CP383