Elecraft W1 - Manual (Page 15)

15
Command
Purpose
Request the user settings currently being
used in RAM
String Length 6 chars.
Response X;
X
Notes
First A or P is Average power or PEP for
Forward Power LEDs. Second A or P is
Average power or PEP for Forward or
Reverse Power serial data. First S or M
or F is Slow or Medium or Fast LED
decay Rate Second S or M or F
is Slow or Medium of Fast Range drop
rate.
Purpose Set W1 to Autorange.
String Length 3 chars.
Response A0;
0
Notes This is the power on default.
Purpose Set W1 Range to Low.
String Length 3 chars.
Response A1;
1
Notes
Purpose Set W1 Range to Medium.
String Length 3 chars
Response A2;
2
Notes
Purpose Set W1 Range to High.
String Length 3 chars.
Response A3;
3
Notes
Purpose Set LED decay rate to Slow.
String Length 3 chars
Response HS;
4
Notes Current setting can be saved in memory.
Purpose Set LED decay rate to Medium.
String Length 3 chars.
Response HM;
5
Notes Current setting can be saved in memory.
Purpose Set LED decay rate to Fast.
String Length 3 chars
Response HF;
6
Notes Current setting can be saved in memory.
Purpose Set Range drop rate to Slow.
String Length 3 chars.
Response YS;
7
Notes Current setting can be saved in memory.
Purpose Set Range drop rate to Medium.
String Length 3 chars.
Response Current setting can be saved in memory.
8
Notes
Purpose Set Range drop rate to Fast.
String Length 3 chars.
Response Current setting can be saved in memory.
9
Notes