Snapping the snap-in filler, Fig. 42] [fig. 41, Step 9) snapping the snap-in filler – EFCO 945 Series User Manual

Page 34: Con't)

945 QUICKSET

SEAL AS REQUIRED. SEE FIG.

34-35 PAGE 29.

8309

8308

8309

PAGE 32

The same action is required for

structural glazed mullions also.

[FIG. 42]

[FIG. 41]

When completely snapped, the

filler should be flush with the

interior and exterior legs of the

vertical.

KDE 11/2003

To snap the snap-in filler, place the ladder in the subsill and align the snap-in

filler with the intermediate vertical, ensuring that the ladders are as tight together as

possible before continuing. Using a rubber mallet, gently tap the filler into place if

necessary. Work from the head to the sill, verifying that the ladder is completely

engaged before anchoring the head. See Figure 42.

STEP 9) SNAPPING THE SNAP-IN FILLER

INCLUDES CAPTURED AND STRUCTURAL GLAZED MULLION SYSTEMS

SECTION VIII - INSTALLATION

(CON'T)

2 1/2"