Installing jamb side ladder, Fig. 26] [fig. 27, Con’t) step 2) installing jamb side ladder – EFCO 945 Series User Manual

Page 28

Make sure that the anchors are installed into the head. Place the ladder on the

subsill at an approximate 30˚ angle. While applying pressure upwards, rotate the

ladder into the condition. See Figure 25 on Page 25 for sill placement into the subsill.

When rotated correctly, the exterior face of the sill should be flush with the exterior

face of the subsill.

[FIG. 26]

[FIG. 27]

LADDER

BAB 11/2000

CONDITION

SECTION VIII - INSTALLATION

(CON’T)

STEP 2) INSTALLING JAMB SIDE LADDER

INCLUDES CAPTURED AND STRUCTURAL GLAZED MULLION SYSTEMS

PAGE 26