Sealing the sill onto the subsill, X door frames, Fig. 25 – EFCO 945 Series User Manual

Page 27: Fig. 24, Step 1) sealing the sill onto the subsill

Apply a silicone type sealant to the subsill in the location shown in Figure 24

before installing the first ladder. Make sure that enough sealant is applied to seal

the areas shown in Figure 25. After installing the ladder and anchoring it, clean off all

excess sealant.

SEALANT

[FIG. 25]

2G22

BAB 11/2000

8344

[FIG. 24]

2G22

SECTION VIII - INSTALLATION

STEP 1) SEALING THE SILL ONTO THE SUBSILL

INCLUDES CAPTURED AND STRUCTURAL GLAZED MULLION SYSTEMS

PAGE 25