EFCO S5600 Inside Glazed User Manual

Page 29

EFCO CORPORATION 6/2012 PART NO. Y304

Page 29 of 29

Series 5600 Inside Glazed Installation Instructions

Section XIII: Reinforcing

Step #1 Install Reinforcing Steel

A.)

At large spans or in high wind load areas, internal steel reinforcement may be

necessary. Reinforcement steel requirements will vary from job to job. Please

reference the Approved Final Shop Drawings for steel reinforcement requirements.

B.)

When steel reinforcement is factory installed into the mullions, fasteners will be
used to prevent damage or slippage of the steel during shipment.