EFCO S5600 Inside Glazed - Manual (Page 20)

EFCO CORPORATION 6/2012 PART NO. Y304 Page 20 of 29
Series 5600 Inside Glazed Installation Instructions
Section X: Glazing Installation
Step #5 Install Glazing Bead at Head
Step #6 Install Wedge Gasket
Step #7 Install Interior Cover
Thoroughly apply sealant to
the ends of the glazing bead
Head Horizontal
Drive the wedge gaskets into
position starting at the center
of the D.L.O. Crowd in the
excess at the ends
Tool sealant into joint
Butter the side of the mullion
where the glazing bead comes
into contact with sealant
Tool sealant into joint
Snap the interior cover into place