Dynojet 198: Kart and ATV Dynamometers - Manual (Page 9)

Document #98234100 1 - 5 Document #98234100 1 - 5
Uncrate the Dyno
Use the following steps to uncrate your dyno.
Step 1
Move the crated dyno to a clear area near your
dyno room.
Step 2
Remove the top of the crate with a suitable pry
bar.
Note: If you ordered the above ground kit it will be in
the top portion of the crate. Remove the kit and
top portion of the crate. Refer to chapter 3
(Optional Accessories Installation) for a list of
the Above Ground Kits contents and
installation instructions.