Dynojet 198: Kart and ATV Dynamometers - Manual (Page 27)

Document #98234100 3 - 3
Rear Deck:
1 - Rear Deck Assembly
3 - Rear Deck Support Arms
Hardware Pack (A) Supports to deck
6 - 3/8" x 2
1/
2"" Hex bolts
6 - 5/16" Flat washers
6 - 3/8" Lock washers
6 - 3/8" Nuts
Hardware Pack (B) Supports to the dyno
2 - 3/8" x
3/
4" Hex bolts w/ lock tight
2 - 5/16" Flat washers
Hardware Pack (C)Rear Deck to the dyno
4 - 3/8" Truss head bolts
Note: All three supports are interchangeable
(Identical)
A
C
B
Rear Deck Support Arms
Rear Deck Assembly