Dynojet 198: Kart and ATV Dynamometers - Manual (Page 17)

Document #98234100 1 - 13
Step 5
Once you have secured the dyno into its final
position, remove the (6) 3/8” hex bolts from the
top deck.
Step 6
Lay the top plate on the top deck of the dyno and
secure it with (6) 3/8” truss head bolts. (Above
ground applications use (8) 3/8” truss head bolts.)
Warning: Never move the dyno without these bolts
installed and torqued to 40 ft-lbs.