Detex V40 ER - Manual (Page 2)

Doors and frames with walls having a structural thickness (metal skin
Fasteners for unreinforced openings are not supplied by Detex.
Unreinforced Frames: Use Blind Rivet Nuts (see sketch)
screw threads, are considered unreinforced for hardware.
plus reinforcement, or solid wood) to engage less than (3) full
X
X
Door Must Not Bind
X
Door Must Not Sag
X
LHR Door
Reinforcement
Door Skin
least (3) screw
frame engages at
Reinforced door or
threads.
Unreinforced Doors: Use Sex Nuts and Bolts
Blind Rivet Nut
Narrow Stile
RHR Door
Horizontal
Stop Face
L
C
40"
Finished
Floor
Reference
Mullion
Face
Inside Face
RHR Door
Door Must Swing Freely
Inside Face
LHR Door
103104 Page 2
!!!CHECK BEFORE STARTING!!!
Minimum door stile 4-1/2" (114 mm)
Template drawings provide door and frame
Mortise strike recommended
Minimum door stile 2" (51mm)
door and frame preparation.
structural and dimensional specifications for
Surface strike possible
Door Must Not be Warped
NOTE: 750mm MAXIMUM DOOR WIDTH OPENING FOR EUROPE FOR 36" DEVICE
(1000mm MAXIMUM DOOR WIDTH OPENING FOR EUROPE FOR 48" DEVICE)
Wide Stile (Surface Strike)
NO MODIFICATION OF ANY KIND, OTHER THAN THOSE DESCRIBED IN THESE INSTRUCTIONS ARE PERMITTED.
THE SAFETY FEATURES OF THIS PRODUCT ARE ESSENTIAL TO ITS COMPLIANCE WITH EN 1125.