Salter Brecknell WB-521 Series - Manual (Page 68)

66 SBI521 Service Manual
Note: When Units = lb:oz, response:
xxxLxx.xO
Or xxxxxLxxO
Figure 6.2 Set for 200F
Note: When Units = lb:oz, response:
xxxlbxx.xoz
Or xxxxxlbxxoz
Command: Z (5ah 0dh)
Response: Zero function is activated (simulate ZERO key). The indicator will not
respond if the scale is in motion, positive overload or negative overload. The indicator
will also not respond if it is not in gross mode or within the zero range specified in the
Setup Menu.
OK
Command: T (54h 0dh)
Response: TARE function is activated (simulate TARE key). The indicator will not
respond if the scale is in motion, positive overload or negative overload. The indicator
will also not respond if it displaying a negative gross value.
OK
Command: C/U (43h/55h 0dh)
Response: Changes units of measure (simulate UNIT key),
OK
Command: G (47h 0dh)
Response: This command is sent to the indicator to revert to gross mode. The indicator
will not respond if the scale is in motion, positive overload or negative overload. The
indicator will also not respond if it is not in net mode.
OK