AVer NXU Lite - Manual (Page 44)

36
2.2.3 Familiarizing the Buttons in PTZ Camera Controller
(9) (8) (7) (6) (5)
(2)
(1)
(3)
(4)
(10)
(11)
Name Function
(1) Close Exit PTZ camera controller.
(2) Camera preset
position number
Move the PTZ camera to the preset point.
(3) Group AutoPan Select to automatically operate PTZ camera in group.
(4) Direction buttons’
moving speed
Adjust the moving speed of the PTZ camera lens. This speed will apply
to the (11) Direction buttons
’ moving speed only.
(5) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and
click the preset position number and save it.
(6) Setup Configure PTZ cameras (also see Chapter 2.3.7 ).
(7) AutoPan Operate the PTZ cameras automatically based on the selected camera
group preset position number. User needs to select the (3) Group
AutoPan, then, click (7)Auto Pan button.
(8) Zoom +/- Zoom in and out the image.
(9) Focus +/- Adjust the focus manually to produce clear image.
(10) Camera ID Display the PTZ camera number that is being operated.
(11) Direction buttons Move and position the focal point of the PTZ camera. The support of
direction button depends on the PTZ camera.