AVer NXU Lite - Manual (Page 40)

32
Name Function
(16) Full screen
Use the entire area of the screen to only display the video. To return, press
the right button of the mouse or ESC on the keyboard or click the arrow
icon.
When NVR in full screen mode, each channel will display current date and
time.
When you switch to full screen in multiple-screen mode, Left click to toggle
to only display one of the video in the multiple-screen mode or all.
(17) Alarm Alert and display warning info. Only Administrator-level can reset and turn
on, off and trigger the Sensor and Relay by right-clicking the item in the
Sensor and Relay list.
(18) Live Playback
button
When live playback function has enabled in Miscellaneous at System
Setting, the live playback icon is appeared on Preview UI while recording
status. Click to playback the recorded file instantly in preview mode.
When the channel is in live playback mode, the icon is . Move the
mouse to the bottom of the live playback channel, the playback tool bar
(
) will show up. Using the playback tool bar to
control the playback. Total 4 channels can be live playback at the same
time.
(19) Volume Adjust the sound volume.
(20) On Screen
Keyboard
If the keyboard is not available, you may use the Virtual Keyboard.
i
IP camera doesn’t support de-interlace.
(21) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
Click to back to
normal display view.