AVer NXU Lite - Manual (Page 164)

156
- Modem Dial up Setting
User may set the time to disconnect automatically, just enable the Auto Disconnect after
check box and set time.
To Setup FTP Setting
1. Next to the File Transmission via FTP
check box, click Detail.
2. In the FTP Setting dialog box, enter the
FTP IP, port, user ID and password.
3. In Number of Pic text box, enter the
number of sequence images that want to
send when file is transmitting. The
maximum number of picture can be
transmitted are 16.
4. If user wants to send the recorded image
before alarm occurs, enter the time that
before alarm occurs in Before
alarm(sec.).
5. Upload image: User needs to select the
camera that the images will be capture
and send when the any alarm is
triggered.
6. Click OK to exit and save the setting and
Cancel to exit without saving the setting.