AVer SEB3104H User Manual
Page 73
67
mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch
back to Preview mode manually.
- Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend additional
time in second before it stops the relay operation. In the Relay Setup dialog box, mark from
the available relay list; set to enable/disable the relay operation when the alarm is activated.
Set the Retrieve time, you may to extend the relay operation time and set the duration in
second. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
- Send E-mail
Send an electronic text message.
Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
To check if it is working, click Test button.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon
(;).
Subject: Enter the message title.