Chapter2511 – AVer SEB3104H User Manual
Page 29
23
Name
Function
(10) Segment
Keep a portion of the recorded video (see also
).
(11) Full screen
View in full screen mode. To return, press the right button of the mouse or ESC on
the keyboard or click the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
(12) Event Log
Show the record of activities that take place in the system.
(13) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second.
(14) Camera ID
Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(15) Find Next
Search for the next event or changes in the motion detector frame. You can use this
when you are using Intelligent Search or Event Search function.
(16) Event Search
Search from the recorded activities that take place in the system (i.e., Sensor,
Motion, Video Loss, POS)
(17) Audio
Enable/disable audio sound.
(18) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
2.4.1.1
To Cut and Save the Wanted Portion of the Recorded Video
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
3. Click Export >> Output button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save the file, type the filename, and
select the video format.