AVer SEB3104H User Manual
Page 50
44
- Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend additional
time in second before it stops the relay operation. In the Alarm Relay dialog box, mark from
the available relay list; set to enable/disable the relay operation when the alarm is activated.
Set the Retrieve time, you may to extend the relay operation time and set the duration in
second. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
- Send E-mail
Send an electronic text message.
Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
To check if it is working, click Test button.
- From: Enter the sender e-mail address.
- To and CC: Enter the recipient email address and separate it with comma or a
semicolon (;).
- Subject: Enter the message title.
- Message: Type the message. Maximum is 4 lines.
Email Notice Setting
Notice Interval: Set the period of time before it sends another e-mail notice.
- Start Recording
Record the video from the selected camera.
1. Select the camera to enable/disable video recording. Enable All to select all cameras.
2. In the Frame Rate selection, select As Setting to record the number of frames based on