AVer SEB3104H - Manual (Page 17)

11
Step 4. Setup Record Schedule
Setup the Schedule to record.
The DVR system wouldn ’t start to record until the record schedule has been set.
1. Click → Setting → Schedule → System
2. Select the date and type of record (Weekly, One Time, or None).
3. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours
table.
4. Click Save.
5. Click Record tab.
6. Select the record mode (Always, Motion, Sensor, Smart, or None).
7. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours
table.
8. Click Save and OK to complete the record schedule setting.
9. To start recording, click (record) button.