AVer H300 user manual - Manual (Page 41)

37
ENGLISH
3. Select the SIP Transport Protocol and
choose the type of transport protocol.
To ensure connection, verify if both calling
parties are using the same transport
protocol. The default setting is UDP.
4. Set the SIP Port.
Change this value only if you use specific
setting in your network system. The
default SIP port setting is 5060.
5. Select the Preferred Protocol and choose
which type you want the system to use as
your first priority. If the system is unable to
establish the call, it will select the other
one.
To Enable/Disable Advanced Encryption Standard
Advanced Encryption Standard (AES) encrypts
the data that is being transmitted while doing the
video conferencing to provide high protection
against unauthorized data access and can only
be read with the device that also support this
standard. The other party must support AES to be
able to use this feature. If not, the data will not be
encrypted.
To activate AES, select Setting in the home menu
> System Settings > General Setting > Call
Settings > Enable AES and press
to
active/deactivate the feature.