AVer H300 user manual - Manual (Page 30)

26
ENGLISH
Setting
In the Setting menu, allows you to modify system setting, check the system info, test the
system before using H300/H100 and watch the recorded file.
Administrator
The Administrator allows you to set password to prevent unauthorized user to change the
system settings, access WebTool, and allow using application programming interface to
remotely communicate with the unit. To avail the source codes, go to our website and contact
our technical support.
Enable/ Disable Administrator Setting
1. Select Setting and press .
2. Select Administrator and press .
3. Select Enable Admin and press to
enable/disable authorizing to change the system
setting, Enable Web Admin to enable/disable
using the WebTool to access the unit, and
Enable Remote to enable/disable using
application programming interface to control the
unit.