Selecting video channel (australian model), Turn tv on, Turn camera on – Canon E 250 User Manual

Page 78: Press mode select button to select play mode, Press >■ (play) button to start playback

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MODE SELECT

(ZD

nnn

1CH OCH

OPERATE

Selecting Video Channel (Australian model)

Video channel means the channel in your area which is not used

by a broadcasting station, and can be used for playback of video

cassettes (channel 0 or 1). If your TV does not have audio/video

input terminals, your TV and tiie video channel selector of the
RU-100 RF Unit must be set to the video channel in order to view
playback.

1. Turn TV on.

2. Turn camera on.

3. Press MODE SELECT button to select PLAY

mode.

4. Press

>■

(PLAY) button to start playback.

5. Set TV and video channel selector to video

channel (video channel selector is factory-set to

1CH) using a flat-edge screwdriver.

• For example, if video charinel in your area is channel 0, set

video channel selector of RU-100 to OCH, then tune TV to
channel 0.