Press start/stop button to start recording, Press start/stop button again to stop recording – Canon E 250 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
111
n
o
J J
4. Press start/stop button to start recording.
• Selected mode appears in viewfinder.
For self-timer recording:
• Countdown 10-1 appears, followed by:
Recording reminder display (SELF recording)
Countdown 30-1 display (SELF 30 recording)
• Tally lamp flashes slo^ during standby and flashes
rapidly when recording starts.
• Recording starts automatically after countdown.
For interval timer recording: ■a.-aa
• After selected mode appears in viewfinder, standby and
recording (eibout 0.5 seconds) are alternately performed.
• Tally lamp flashes slowly during interval timer recording.
5. Press start/stop button again to stop recording.
• Camera goes into record pause mode.
Notes:
• Press the start/stop button to cancel self-timer recording during countdown.
• As a power source for intenral timer recording, the CA-100 Compact Power Adapter or CB-110 Car
Battery Adapter are better suited for the lengthy recording time that may be required.
• The camera will automatically turn off after about 6 hourq of intenral operation in order to protect
camera parts from damage.
• Noise occasionally may occur at intervals.
• Use only SP mode for intenral timer function.
55