Wl-50 wireless controller – Canon E 250 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WL-50 Wireless Controller
Using the wireless controller you can operate
the camera from a distance,
O
Transmitter
e F. (Fade) START/STOP Button
0 ON SCREEN Button
O FF ►►Button
0 PLAY ► Button
O STILL Button
O REC # Button
0 STOP ■ Button
0 REW ◄◄ Button
O TAPE RETURN Button
0 COUNTER RESET Button
0 ZOOM Buttons
0 START/STOP Button
Operation
Aim wireless controller at camera remote
sensor and press control buttons to operate
camera. Remote sensor is located just below
the microphone. Use wireless controller within
4 metres of the camera. The tally lamp, located
above and to the right of lens, lights up when
renK>te sensor receives a signal.
O Remote Sensor
0 Tally Lamp
10
Notes:
• When using wireless contrôler, check that it lights up the tally lamp. If tally lamp lights/ wireless
controller can be used from that position.
• If you are too close to camera when operating wireless controller, camera may not respond to wireless
controller's signal.