Press start/stop button, When recording has ended, press eject button – Canon E 250 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
D
m
o
O
J 3
D
2
O
REC
0
;
00
;
01
0:00:23
PAUSE
7. Press start/stop button.
• Recording starts.
• Tally lamp flashes rapidly and “REC” appears in
viev^nder.
• See pp. 33-63 for information on making your recordings
more effective.
8. Press start/stop button again to temporarily
pause recording.
• Press start/stop button once again to resume recording.
• See “Record Review” (p. 34) to check your recording.
9. When recording has ended, press EJECT
button.
• Video cassette compartment opens.
10. Remove video cassette and close video
cassette compartment again.
11. Turn camera off.
• Mode indicator goes off.
Notes:
• The tape counter will be reset to 0:00:00 each time a video cassette is loaded.
• The camera automatically turns off if record pause mode lasts more than approximately 7 minutes. To
resume recording turn camera on and press start/stop button.
• For security, check the viewfinder display for correct mode during shooting.
• Avoid recording near sources of electric or magnetic fields, such as a TV tower, which can cause noise
in the picture or a camera malfunction.
• If tape speed is changed during recording, the tape will contain noise at that point.
29