Canon EOS 650 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Automatic Film Speed Setting

The camera automatically sets
film speed by sensing the DX code

marked on the film cartridge.

(ISO 25-5000 according to DX
code standard)

The

automatically-set

film

speed will appear in the display

panel while the film advances

to the first usable frame.

2. When using film without a DX

code, set the speed manually
by following these steps: (ISO

6-6400).

Set the main switch to

either “A” or “ (co)

2) Open the switch cover, and

press both the blue and

yellow buttons at the same
time to display the ISO film

speed number.

3) Turn the electronic input

dial until your film speed
displays.

Once the buttons are de
pressed, you can remove

your fingers because the

ISO display is held on for ap

proximately eight seconds.

To clear this status within

eight seconds, press the
shooting mode selector.

The previously set film
speed appears and blinks in

the display panel to warn
you if the film speed has not
been set. Always be sure to
set the correct film speed,

because the warning stops
after film speed setting.

mm»