Setting the film winding mode, Setting the shooting mode – Canon EOS 650 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Setting the Film Winding Mode

This camera has two automatic film winding
modes.

S: Single exposure. The film automatically ad

vances to the next frame upon shutter release.

C: Continuous exposure. Keep pressing the shut
ter button and the film winds continuously at the
maximum speed of approximately three frames
per second.

Self-timer position, (see p. 58)

To set the film winding mode, follow these steps:

1) Open the switch cover and press the blue film

winding mode selector.

• The display will be held on for approximate

ly eight seconds so you can remove your

finger. To clear this status within eight
seconds, press the shooting mode selec

tor.

2) Turn the electronic Input dial to set either “S”

or “C” in the display panel.

4. Setting the Shooting Mode

To set the shooting mode, press the shooting

mode selector while turning the electronic input

dial until the desired mode appears. (The display

moves in the following cycle.)

• Once the shutter button Is pressed halfway,

the display'will be held on for approximately
eight seconds. To clear this status within eight sec
onds, press the shooting mode selector.

AF can be done with the Canon Circular

Polarizing Filter PL-C. When using a linear

polarizing filter, use manual focusing, .(see p.

56)____________________________________

Manual (p.42)

Program AE mode

(p. 28)

Shutter-Priority

AE mode (p.32)

EOS 650 Only

f DEPTH

Aperture-Priority

AE mode (p.34)

Depth of Field

AE mode (p.38)