Main switch functions – Canon EOS 650 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Main Switch Functions
The main switch has four positions.
L(OFF): Turns off the camera. Be sure to set
at this position to prevent accidental shutter
release when not in use.
A(ON):Activates the camera. (The electronic
beeper tone does not sound at this position.)
22
(
m
)(ON); In addition to being the same ON posi
tion as “A”, the electronic beeper tone sounds
In the following cases;
1) When correct focus is obtained. ~AF focus
signal (short beeper tone)
2) When the automatically-set shutter speed
is too slow to hand-hold.-Camera-shake
warning (long beeper tone)
a (ON): Full auto position. The setting will be
as follows automatically regardless of the
mode.
1) AF mode - ONE SHOT
2) AE mode — P (Program)
3) Film winding mode - S (Single)
4) • Electronic beeper tone
- short; AF focus signal
- long; camera-shake warning
Various AE and AF modes described in
“Making the Most of Your EOS 620/650”
cannot be set when the main switch is at
the “O” position. Make sure the main
switch is set to “A” or“(<•»)” position.
23