Canon EOS 650 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Setting the Main Switch to the ^Tuii Auto” Position

1) Slide the lens focus mode 2) Set the camera’s main switch

switch to “AF.”

^2. Holding the Camera

to the “Full Auto” position (the

green “ a ” mark).

The following displays will
appear:

ONE SHOT: One of the AF

modes.

P (Program): One of the AE

modes.

S (Single): One of the film

winding modes.

For further details on the

above displays, please refer
to pp. 24, 26 and 27.

Your pictures will not be sharp if the camera
moves as the shutter Is pressed. This movement
is called “camera-shake.” To avoid this, try the
following comera-holding technique:

1) Hold the camera firmly, with your left hand sup

porting the camera and lens.

2) Press your left elbow close to your body.

3) Lightly hold the camera against your cheek or

forehead and look into the viewfinder.

4) Spread your feet slightly apart, one foot ahead

of the other, and relax.

There is no one correct way to hold the

camera, so experiment to find the most
comfortable way. If possible, lean against a
steady support such as a tree, wall, or table

to help you keep the camera still.