Lcd panel display, P tv a\ depth, Appendix – Canon EOS 650 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Lithium Battery Pack (2)
Even if one blinking bar mark or no bar mark ap

pears in the display panel during battery check, ex
posure will be correct as long as the shutter

releases. Automatic wind and rewind, however,

may not be possible because of Insufficient bat
tery power.
Also, if the camera stops during wind or rewind all
the film transport bars start blinking to warn you.

Automatic rewind re-starts after new battery pack

replacement and pressing the film rewind but

ton.

5. X-ray Examinations at Airports

Film passing through X-ray examinations at air

ports may be exposed and ruined even when load
ed. To avoid accidental exposure, tell the inspec

tor to hand-check your camera and film.

Appendix

1. LCD Panel Display

This camera uses a liquid crystal display panel to

indicate shooting information. The diagram below
shows all the Information for explanation. How

ever, the display never actually looks like this.

Normally, the panel displays only the information
required at the time.

EOS 650

©-

4-c

L$i

.©

P Tv A\ DEPTH

ONE SHOT
-SERVO
.M.FOCUS

■ j—@ -n

'1----@-|-®

-----®—I

0 Battery check

0 Depth of field AE

0 ISO film speed

0 Shutter speed

0 Metered manual exposure level

©Program AE

©Manual

0 ISO indicator

0 AF mode

— @

0 One-shot AF

©Servo AF

-a

-a-