Canon EOS 650 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Display Panel Illumination (EOS 620 Only)

2) Compose the picture and while continuing to

hold down the shutter button gently press the

shutter button completely to take the picture.

• The camera automatically advances the

film to the next frame.

Set the main switch to “L”
camera.

to turn off the

This camera is equipped with advanced

“evaluative metering” so it automatically

recognizes lighting conditions, subject pat

tern, and even subject size in the picture
area. Even when there is a difference in
brightness between the main subject and
the background (e.g. backlit photography),
correct exposure can be obtained without
exposure compensation.

Press the display panel illumination button to il-

liminate the display panel for approximately

eight seconds.

• To turn off the illumination within eight

seconds press the display panel illumination
button again.

^5. Automatic Film Rewind

The film automatically rewinds at the end of the roll.

■

□« 5

1) During rewind the film transport bars move in

sequence from right to left to indicate the func

tion In progress while the frame counter
counts in descending order.

2) Film rewind stops automatically when the film

has been completely rewound. Open the back

cover when the film-load check mark((§L)
blinks.