C.fn-02 af point sejection method, C.fn^w emission of bullt'in af-assist beam, In av mode – Canon Rebel T2 300X User Manual
Page 50: Hsnsetting custom functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HSnSetting Custom Functions*
C.Fn-02 AF point seJection method
0 : Press AF point selection button, then press the cross keys.
1 : Press the shutter button halfway, then press cross keys.
Effective during the <(2»4> and <(j>6> active times
Pressing the
C.Fn-03 Switch to centre AF point with AF point selection
button
0 : Disabled
1
:
Enabled
C.Fn^W Emission of bullt'In AF-assIst beam
0 : Enabled
1 : Disabled
C.Fn-05 Shutter curtain sync with buiit'in flash and EX'
series Speedllte
0 : 1st-curtaln sync
1 : 2nd-curtaln sync
With second-curtain sync and a slow shutter speed, you can create a light
trail following a moving subject The flash fires right before the shutter
closes. Second-curtain sync can be set even with EOS-dedicated
Speedlites which cannot switch the shutter curtain synchronization. The
Speedlile with a shutter curtain synchronization setting will override the
camera’s setting
*When you press the shutter button completely, a preflash will be fired for flash
exposure control.
In Av mode
0 : Auto
1 : 1/125 sec. (fixed)
When you use flash in the aperture-priority mode (Av). the flash sync speed
will be fixed at 1 /125 sec. This prevents the camera from setting a slow sync
speed in low-light conditions.
48