Sfl safety release lock, Set it to “i, Using the built-in flash – Canon Rebel T2 300X User Manual
Page 46: In a basic zone mode, In a creative zone mode, Sflsafety release lock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
sfl Safety Release Lock
This prevents shutter reteese it there t$ no frim loaded or if there is no lens
attached. It is particulahv effective agaLnsi missed shots due to no Him.
If you press the shutter button v^jie there is no Him in the camera or no lens
attached, "no (F; Him) or *
od
L'(L fens) will blink in the i/jewfinder and on
the LCD panel.____________________________________________________
Move the <^> arrow to the
Set it to “i.”
• Turn the <^ol> dial.
• To cancel the setting, set it to “0."
Using the Built-in Flash
With E-TTL II autoflash, high-precision and consistent flash exposures can be
obtained.
In a Basic Zone Mode
In low-light or backlit conditions, the built-in flash will pop up and fire automatically
(except in <^>
In a Creative Zone Mode
Press the < ^ > button to pop up the built-in flash.
P
: Use this mode for automatic flash photography. The flash sync speed
(1/60-1/125 sec.) and aperture value will be set automatically as with the
<0> (Full Auto) mode.
Tv : Use this mode if you want to set the flash sync speed manually (within 30
sec. -1/125 sec.). The camera will set the flash aperture value
automatically to obtain a correct flash exposure.
44