Canon Rebel T2 300X - Manual (Page 40)

A-DEP Automatic Depth-of-Field AE
This mode is for obtaining a wide depth of field automatically between a near
subject and far subject. It is effective for group photos and landscapes,
The camera uses the 7 AF points to detect the nearest and farthest subjects to be
in focus.
stands for Auto-depth of field. •
Turn the Mode Dial to
2
Focus the subject.
• Move the AF point over the subject and
press the shutter button halfway.
• Focus is achieved at all the AF point
marks that light.
Take the picture.
The <
ArDEP>
rfisde cannot be used^ the l#is’ fociis mode switch is set to <№№».
The result will be the same as using the
mode.
i If the aperture value blinks, it indic^es ttiat the exposure level is correct but the
desired depth of field canr^ be a^ieved Either use awide'^angle tensor
iTit>/e further away from the subjects.
• In thte^Kxitirig mode, ^ cannot freely change the shutter speed ^
aperture valyte. If tt^cam^ s^ a ^c^^utter speed, holdthe camera :::
steady or use a tripod.
Regardless of the AF mode setting, ONE-SHCfT AF will take effect.
If Hash Is used, the result iMIl be t^ sar^ as using in 1^
38