Mounting a lens, Remove the caps, Mount the lens – Canon Rebel T2 300X User Manual

Page 15: On the lens, set the focus mode ^ switch to

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Mounting and Detaching a Lens

Mounting a Lens

Remove the caps.

• Remove the rear lens cap and the camera

body cap

Mount the lens.

• Align the red dots on the lens and camera

and turn the lens as shown by the arrow
until it snaps in place.

^ On the lens, set the focus mode

switch to .

• If the focus mode switch is set to ,

autofocus will not operate

Remove the front lens cap.

Detaching the Lens

While pressing the lens release
button, turn the lens as shown by the
arrow.

• Turn the lens until it stops, then detach it.

1^ •

Keep

the

caps you wHL not lose ihem

•

stands lor "Auto Focus,''ard stands for "MaoLis] Fbous."

• An EF^ tens cannot be attached

the cafners.