E±!l selecting the af point – Canon Rebel T2 300X User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The AF point is used for focusing. The AF point can be selected automatically by

the camera or manually by you In the Basic Zone modes and

mode, the

AF point selection is automatic only. In the

< Av>

modes, the

AF point can be selected either automatically or manually.

• Automatic AF point Selection

The camera selects the AF point automatically according to situation

* Manuai AF point Seiection

You can select any of the seven AF points manually. This is best when you want

to be sure to focus on a particular subject, or to compose a particular shot

quickly.

E±!l Selecting the AF point^

Press the button. (d6)

► The currently-selected AF point will light.

Select with cross keys

Automatic selection

!-<>•[> Kj- ^

Automatic selection

Select the desired AF point.

• While looking at the AF point on the LCD

panel or in the viewfinder, press the cross
keys to select the desired AF point.

• To select a horizontal AF point, press the

left or right cross key. To select a vertical

AF point, press the top or bottom cross

key.

• You can also turn the <|^> dial to select

an AF point.

• If all the AF points light, automatic AF

point selection will be set.

• Press the shutter button halfway to return

to shooting.