Fe lock, Ae lock, Using the built-in flash – Canon Rebel T2 300X User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Built-in Flash

*FE Lock*

FE (Flash Exposure) lock is for setting the correct flash exposure for any part of
the subject. First pop-up the built-in flash

Focus the subject.

• Keep pressing the shutter button until

step

Aim the viewfinder centre over the

target subject, then press the

<-^>

button.

► A preflash is fired and the <-X-> icon will

be displayed in the viewfinder

Compose the shot and take the

picture.

O * lfthesubjectisbeyondtheeffectiveflashrangeresultinginundere)qxisure,the

icon will blirri<. Get closer to the siiiject and repeat steps 1 ^2.

• For the external Speedite. use an EX-series Speedlite. If the camera is used

with an EZ-, E-, EG-, ML-, or TL-series Speedlite, the flash will not fire in the
TTL and A-TTL ^oflash modes. Use the manual flash rrxxje if the ^»edlite

hasor^.

Aboiri E-TTLII Autoflash

E-TTLII is a new autoflash exposure system incorporating Improvedfla^

exposure control and lens foetidng distarx:« information, making it more precise

№an the previous E-TTL (evaluative flash metering with preflash) sy^em.
The camera c^ execute E-TTL II autoflash with any EX-series Speedlite.