Canon PowerShot 350 - Manual (Page 33)

Notes/TIps
A Compose the picture as desired,
^ then press the shutter button.
o
The self-timer lamp starts to blink. After
about 8 seconds the indicator will start to
blink faster and after 10 seconds the
shutter is released.
• Place the camera on a steady surface, or
mount it on a tripod when using self-timer
mode.
• You cannot adjust the shutter release period.
^ Press the shutter button to
ib take the picture.
O
• You can hold the camera as close as 30 mm
to the subject.
• Do not use the flash since the subject is too
close for it to be effective.
• Always set the lever to Normal when you
have finished using the Macro function.
W.BAL button for
or longer until ^
LCD panel, with a
section of the
filling the display.
Q Compose the
O picture with
the image
from the
negative film
filling the
display then
press the
• The camera is normally used in positive image mode.
"NEGA” appears on the LCD panel when negative image
mode is selected.
•
You will need to place a light source behind the negative film
when capturing images from it.
• The flash does not fire in negative image mode.
• Pressing the N/P, MULTI button again returns the camera to
positive image mode. (NEGA is no longer displayed on the
LCD panel.)
•
The camera automatically reverts to positive image mode
after the power is turned off.
•
Due to the image processing involved, image quality may
not be as good as normal for some images.
>
a
§
z
o
m
o
O
■o
m
3)
5
o
z
CO