Canon PowerShot 350 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Notes/Tips

2 Connect the AC adapter.

See Using the AC Adapter. (-*12)

The batteries are recharged by the camera.
The CHARGING lamp lights and the batteries
are charged. The CHARGING lamp goes out
when the batteries are fully charged — this
takes about eight hours.

• Use only the rechargeable Ni-Cd batteries

supplied, or P-3GAV type rechargeable Ni-Cd
batteries.

• It takes about eight hours to charge the

batteries.

• You can also use the AC adapter as a power

source for the camera.

• The camera power is on when the

BUSY/POWER lamp is on and batteries

cannot be charged. The CHARGING lamp
will light and the batteries will begin to charge
when the power switch is turned off.

• Always remove the Ni-Cd batteries if you will

not be using the camera for a long time.

• To prevent damage to the camera, the

camera is designed so that it does not
charge normal batteries.